Zoeller

3/10 HP Cast Iron Case Submersible Sump Pump

99252 MFG #: 53-0001
Zoeller 3/10 HP Cast Iron Case Submersible Sump Pump 99252
  • Horsepower: 3/10 hp
  • Flow Rate: 43 GPM
  • Discharge: 1-1/2"
  • Amps: 9.7
  • Voltage Rating: 115V
  • Cord Length: 9'
  • Specifications
  • Description
  • Documents
  • Type: Single Seal, Automatic, Submersible
  • Discharge Size: 1-1/2 Inch
  • End Connection: Threaded Outlet
  • Overall Dimensions: 7-7/8 Inch Width x 10-1/16 Inch Height
  • Float Type: Variable Level
  • Flow Rate: 43 GPM
  • Discharge Head: 19.25 Foot
  • Casing Material: Cast Iron
  • Shaft Material: AISI 1215 Cold Rolled Steel
  • Housing Material: Powder Coated Epoxy Cast Iron
  • Impeller Material: Plastic
  • Impeller Design: Non-Clogging Vortex
  • Shaft Seal Details: Carbon and Ceramic Mechanical Seal
  • Solid Size: 1/2 Inch (Spherical)
  • Power Cord Length: 9 Foot
  • Power Rating: 3/10 HP
  • Input Supply Rating: 115 Volt AC 60 Hertz 1-Phase 9.7 Amp
  • Speed Rating: 1550 RPM
  • Temperature Rating: 130 Deg F
  • Motor Type: Class B Insulation, Oil Filled Shaded Pole
  • Options: Pump Stand
  • Inclusions/Features: Upper and Lower Cast Iron Sleeve Bearing, Stainless Steel Hardware, Neoprene Gasket, Engineered Thermoplastic Base, Cast Iron Motor Housing/Cap
  • Application: Residential Dewatering (Sump) or Effluent System
  • Applicable Standard: CSA C22.2 108, CSA (Canada and US), UL 778, SSPMA
  • Additional Information: Motor Protection Type Auto Reset Thermal Overload; Cord Type 3-Wire, Grounded Plug; Auto On/Off Point 7-1/4 Inch or 3 Inch
Sump Pump; Type Single Seal, Automatic, Submersible; Discharge Size 1-1/2 Inch; End Connection Threaded Outlet; Overall Dimensions 7-7/8 Inch Width x 10-1/16 Inch Height; Float Type Variable Level; Flow Rate 43 GPM; Discharge Head 19.25 Foot; Casing Material Cast Iron; Shaft Material AISI 1215 Cold Rolled Steel; Housing Material Powder Coated Epoxy Cast Iron; Impeller Material Plastic; Impeller Design Non-Clogging Vortex; Shaft Seal Details Carbon and Ceramic Mechanical Seal; Solid Size 1/2 Inch (Spherical); Power Cord Length 9 Foot; Power Rating 3/10 HP; Input Supply Rating 115 Volt AC 60 Hertz 1-Phase 9.7 Amp; Speed Rating 1550 RPM; Temperature Rating 130 Deg F; Motor Type Class B Insulation, Oil Filled Shaded Pole; Options Pump Stand; Inclusions/Features Upper and Lower Cast Iron Sleeve Bearing, Stainless Steel Hardware, Neoprene Gasket, Engineered Thermoplastic Base, Cast Iron Motor Housing/Cap; Application Residential Dewatering (Sump) or Effluent System; Applicable Standard CSA C22.2 108, CSA (Canada and US), UL 778, SSPMA; Motor Protection Type Auto Reset Thermal Overload; Cord Type 3-Wire, Grounded Plug; Auto On/Off Point 7-1/4 Inch or 3 Inch