• Home
  • Plumbing
  • Pumps
  • Booster Pumps
  • 3/4 To 1-1/2", Flanged X Flanged, 115 VAC 60 Hz 1-phase, 1.75 A, 1/12 HP, 125 PSI, 34 GPM , 1725 RPM, 8' Discharge Head, Cast Iron, 3-piece, In-line, Circulating Booster Pump
Bell & Gossett

3/4 To 1-1/2", Flanged X Flanged, 115 VAC 60 Hz 1-phase, 1.75 A, 1/12 HP, 125 PSI, 34 GPM , 1725 RPM, 8' Discharge Head, Cast Iron, 3-piece, In-line, Circulating Booster Pump

97 MFG #: 106189
Bell & Gossett 3/4" to 1 1/2" Booster Pump 97
  • End Connection: Flanged x Flanged
  • Nominal Size: 3/4" to 1-1/2"
  • Flow Rate: 34 gpm
  • Horsepower: 1/12 hp
  • Amps: 1.75
  • Voltage Rating: 115V
  • Specifications
  • Description
  • Documents
  • Type: 3-Piece, In-Line
  • Suction Size: 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch
  • Discharge Size: 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch
  • End Connection: Flanged x Flanged
  • Overall Dimensions: 14-7/8 Inch Length x 6-3/8 Inch Height
  • Flow Rate: 0 to 34 GPM
  • Discharge Head: 0 to 8 Foot
  • Casing Material: Cast Iron
  • Shaft Material: Heat Treated Carbon Steel
  • Impeller Material: Polypropylene
  • Impeller Design: Closed
  • Warranty: 3 Year from Date Code/1 Year from Date of Installation
  • Shaft Seal Details: Carbon on Ceramic Mechanical Seal
  • Power Rating: 1/12 HP
  • Input Supply Rating: 115 Volt AC 60 Hertz 1-Phase 1.75 Amp
  • Speed Rating: 1725 RPM
  • Temperature Rating: 225 Deg F (Standard Seal), 250 Deg F (Special Seal)
  • Pressure Rating: 125 PSI
  • Motor Type: Oil Lubricated, Built-In Overload Protection, Open Dripproof
  • Inclusions/Features: Sleeve Bearing, Noise Dampening Coupler, Precision Ground Shaft
  • Application: Hydronic Heating and Domestic Hot Water Circulation
  • Applicable Standard: UL (Canada and US), CSA
Circulating Booster Pump; Type 3-Piece, In-Line; Suction Size 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch; Discharge Size 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch; End Connection Flanged x Flanged; Overall Dimensions 14-7/8 Inch Length x 6-3/8 Inch Height; Flow Rate 0 to 34 GPM; Discharge Head 0 to 8 Foot; Casing Material Cast Iron; Shaft Material Heat Treated Carbon Steel; Impeller Material Polypropylene; Impeller Design Closed; Warranty 3 Year from Date Code/1 Year from Date of Installation; Shaft Seal Details Carbon on Ceramic Mechanical Seal; Power Rating 1/12 HP; Input Supply Rating 115 Volt AC 60 Hertz 1-Phase 1.75 Amp; Speed Rating 1725 RPM; Temperature Rating 225 Deg F (Standard Seal), 250 Deg F (Special Seal); Pressure Rating 125 PSI; Motor Type Oil Lubricated, Built-In Overload Protection, Open Dripproof; Inclusions/Features Sleeve Bearing, Noise Dampening Coupler, Precision Ground Shaft; Application Hydronic Heating and Domestic Hot Water Circulation; Applicable Standard UL (Canada and US), CSA