3/4 To 1-1/2", Flanged X Flanged, 115 VAC 60 Hz 1-phase, 1.76 A, 1/8 HP, 150 PSI, 31 GPM , 3250 RPM, 31' Discharge Head, Lead-free, Cast Iron, Cartridge Circulator Pump

• Suction Size: 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch
• Discharge Size: 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch
• End Connection: Flanged x Flanged
• Overall Dimensions: 7-1/2 Inch Length x 5-5/8 Inch Width x 6-1/2 Inch Height
• Flow Rate: 31 GPM
• Discharge Head: 31 Foot
• Casing Material: Cast Iron
• Shaft Material: Ceramic
• Impeller Material: Non-Metallic
• Impeller Design: Closed
• Warranty: 3 Year from Date of Manufacture
• Power Rating: 1/8 HP
• Input Supply Rating: 115 Volt AC 60 Hertz 1-Phase 1.76 Amp
• Speed Rating: 3250 RPM
• Temperature Rating: 40 to 230 Deg F
• Pressure Rating: 150 PSI
• Motor Type: Permanent Split Capacitor, Impedance Protected
• Inclusions/Features: Compact Design, Direct Drive Low Power Consumption, Self-Lubricating, Horizontal Mount, Standard Flange, Aluminum Stator Housing, Stainless Steel Cartridge, Carbon Bearing, EPDM O-Ring and Gasket, ACB Anti-Condensate Baffle
• Exclusions: Mechanical Seal
• Application: Residential/Light Commercial Closed Loop Hydronic Heating, High Pressure Drop Boiler, Fan Coil Unit, Heat Exchanger, Chilled Water Cooling/Large Radiant Heating/Large Heat Recovery/Geothermal System, Higher Head/Medium Flow, Indoor
• Applicable Standard: UL (Canada and US), NSF/ANSI 372
• Additional Information: Lead-Free

Cartridge Circulator Pump; Suction Size 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch; Discharge Size 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch; End Connection Flanged x Flanged; Overall Dimensions 7-1/2 Inch Length x 5-5/8 Inch Width x 6-1/2 Inch Height; Flow Rate 31 GPM; Discharge Head 31 Foot; Casing Material Cast Iron; Shaft Material Ceramic; Impeller Material Non-Metallic; Impeller Design Closed; Warranty 3 Year from Date of Manufacture; Power Rating 1/8 HP; Input Supply Rating 115 Volt AC 60 Hertz 1-Phase 1.76 Amp; Speed Rating 3250 RPM; Temperature Rating 40 to 230 Deg F; Pressure Rating 150 PSI; Motor Type Permanent Split Capacitor, Impedance Protected; Inclusions/Features Compact Design, Direct Drive Low Power Consumption, Self-Lubricating, Horizontal Mount, Standard Flange, Aluminum Stator Housing, Stainless Steel Cartridge, Carbon Bearing, EPDM O-Ring and Gasket, ACB Anti-Condensate Baffle; Exclusions Mechanical Seal; Application Residential/Light Commercial Closed Loop Hydronic Heating, High Pressure Drop Boiler, Fan Coil Unit, Heat Exchanger, Chilled Water Cooling/Large Radiant Heating/Large Heat Recovery/Geothermal System, Higher Head/Medium Flow, Indoor; Applicable Standard UL (Canada and US), NSF/ANSI 372; Lead-Free

Catalog
Data Sheet/Technical
Installation/Operator
Warranty
Parts
Other 1