Taco

3/4 To 1-1/2", Flanged X Flanged, 115 VAC 60 Hz 1-phase, 1.1 A, 1/8 HP, 150 PSI, 32 GPM , 3250 RPM, 10' Discharge Head, Lead-free, Cast Iron, Cartridge Circulator Pump

1098234 MFG #: 0010-F3
  • Connection Size: 3/4" to 1-1/2"
  • End Connection: Flanged x Flanged
  • Horsepower: 1/8 hp
  • Flow Rate: 32 gpm
  • Discharge Head: 10'
  • Specifications
  • Description
  • Documents
  • Suction Size: 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch
  • Discharge Size: 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch
  • End Connection: Flanged x Flanged
  • Overall Dimensions: 7-1/4 Inch Length x 5-3/8 Inch Width x 6-3/8 Inch Height
  • Flow Rate: 32 GPM
  • Discharge Head: 10 Foot
  • Casing Material: Cast Iron
  • Shaft Material: Ceramic
  • Impeller Material: Non-Metallic
  • Impeller Design: Open
  • Warranty: 3 Year from Date of Manufacture
  • Power Rating: 1/8 HP
  • Input Supply Rating: 115 Volt AC 60 Hertz 1-Phase 1.1 Amp
  • Speed Rating: 3250 RPM
  • Temperature Rating: 40 to 230 Deg F
  • Pressure Rating: 150 PSI
  • Motor Type: Permanent Split Capacitor, Impedance Protected
  • Inclusions/Features: Compact Design, Direct Drive Low Power Consumption, Self-Lubricating, Horizontal Mount, Standard Flange, Aluminum Stator Housing, Carbon Bearing, EPDM O-Ring and Gasket
  • Exclusions: Mechanical Seal
  • Application: Hydronic Heating, Radiant Heating, Primary-Secondary Loop, Indirect Water Heater, Chilled Water Cooling and Potable Hot Water System
  • Applicable Standard: UL (Canada and US), NSF/ANSI 372
  • Additional Information: Lead-Free
Cartridge Circulator Pump; Suction Size 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch; Discharge Size 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch; End Connection Flanged x Flanged; Overall Dimensions 7-1/4 Inch Length x 5-3/8 Inch Width x 6-3/8 Inch Height; Flow Rate 32 GPM; Discharge Head 10 Foot; Casing Material Cast Iron; Shaft Material Ceramic; Impeller Material Non-Metallic; Impeller Design Open; Warranty 3 Year from Date of Manufacture; Power Rating 1/8 HP; Input Supply Rating 115 Volt AC 60 Hertz 1-Phase 1.1 Amp; Speed Rating 3250 RPM; Temperature Rating 40 to 230 Deg F; Pressure Rating 150 PSI; Motor Type Permanent Split Capacitor, Impedance Protected; Inclusions/Features Compact Design, Direct Drive Low Power Consumption, Self-Lubricating, Horizontal Mount, Standard Flange, Aluminum Stator Housing, Carbon Bearing, EPDM O-Ring and Gasket; Exclusions Mechanical Seal; Application Hydronic Heating, Radiant Heating, Primary-Secondary Loop, Indirect Water Heater, Chilled Water Cooling and Potable Hot Water System; Applicable Standard UL (Canada and US), NSF/ANSI 372; Lead-Free