3/4", Soldered X Soldered, 115 VAC 60 Hz 1-phase, 0.52 A, 1/40 HP, 125 PSI, 11 GPM , 3250 RPM, 9.5' Discharge Head, Lead-free, Bronze, Cartridge Circulator Pump

• Suction Size: 3/4 Inch
• Discharge Size: 3/4 Inch
• End Connection: Soldered x Soldered
• Overall Dimensions: 5-1/8 Inch Length x 3-15/16 Inch Width
• Flow Rate: 0 to 11 GPM
• Discharge Head: 0 to 9.5 Foot
• Casing Material: Bronze
• Shaft Material: Ceramic
• Impeller Material: Non-Metallic
• Warranty: 3 Year from Date of Manufacture
• Power Rating: 1/40 HP
• Input Supply Rating: 115 Volt AC 60 Hertz 1-Phase 0.52 Amp
• Speed Rating: 3250 RPM
• Temperature Rating: 40 to 220 Deg F
• Pressure Rating: 125 PSI
• Motor Type: Permanent Split Capacitor, Impedance Protected
• Inclusions/Features: Compact Design, Direct Drive Low Power Consumption, Self-Lubricating, Horizontal Mount, Steel Stator Housing, Stainless Steel Cartridge, Carbon Bearing, Chlorine Resistant EPDM O-Ring and Gasket
• Exclusions: Mechanical Seal
• Application: Hydro-Air Heating/Cooling, Heat Recovery Unit, Water Source Heat Pump, Hot or Chilled Water Cooling, Domestic Hot Water Recirculation System, Drain Down Open Loop Solar System, Fresh Water or Potable Water System, Indoor
• Applicable Standard: UL (Canada and US), NSF/ANSI 61/372
• Additional Information: Lead-Free

Cartridge Circulator Pump; Suction Size 3/4 Inch; Discharge Size 3/4 Inch; End Connection Soldered x Soldered; Overall Dimensions 5-1/8 Inch Length x 3-15/16 Inch Width; Flow Rate 0 to 11 GPM; Discharge Head 0 to 9.5 Foot; Casing Material Bronze; Shaft Material Ceramic; Impeller Material Non-Metallic; Warranty 3 Year from Date of Manufacture; Power Rating 1/40 HP; Input Supply Rating 115 Volt AC 60 Hertz 1-Phase 0.52 Amp; Speed Rating 3250 RPM; Temperature Rating 40 to 220 Deg F; Pressure Rating 125 PSI; Motor Type Permanent Split Capacitor, Impedance Protected; Inclusions/Features Compact Design, Direct Drive Low Power Consumption, Self-Lubricating, Horizontal Mount, Steel Stator Housing, Stainless Steel Cartridge, Carbon Bearing, Chlorine Resistant EPDM O-Ring and Gasket; Exclusions Mechanical Seal; Application Hydro-Air Heating/Cooling, Heat Recovery Unit, Water Source Heat Pump, Hot or Chilled Water Cooling, Domestic Hot Water Recirculation System, Drain Down Open Loop Solar System, Fresh Water or Potable Water System, Indoor; Applicable Standard UL (Canada and US), NSF/ANSI 61/372; Lead-Free

Catalog
Data Sheet/Technical
Installation/Operator
Warranty
Parts
Other 1