Taco

3/4", FPT X FPT, 115 VAC 60 Hz 1-phase, 0.52 A, 1/40 HP, 125 PSI, 11 GPM , 3250 RPM, 9.5' Discharge Head, Lead-free, Stainless Steel, Cartridge Circulator Pump

1724264 MFG #: 006-ST4
  • Connection Size: 3/4"
  • End Connection: FPT x FPT
  • Horsepower: 1/40 hp
  • Flow Rate: 11 gpm
  • Discharge Head: 9-1/2'
  • Specifications
  • Description
  • Documents
  • Suction Size: 3/4 Inch
  • Discharge Size: 3/4 Inch
  • End Connection: Female Threaded x Female Threaded
  • Overall Dimensions: 5-5/8 Inch Length x 3-15/16 Inch Width
  • Flow Rate: 0 to 11 GPM
  • Discharge Head: 0 to 9.5 Foot
  • Casing Material: Stainless Steel
  • Shaft Material: Ceramic
  • Impeller Material: Non-Metallic
  • Warranty: 3 Year from Date of Manufacture
  • Power Rating: 1/40 HP
  • Input Supply Rating: 115 Volt AC 60 Hertz 1-Phase 0.52 Amp
  • Speed Rating: 3250 RPM
  • Temperature Rating: 40 to 220 Deg F
  • Pressure Rating: 125 PSI
  • Motor Type: Permanent Split Capacitor, Impedance Protected
  • Inclusions/Features: Compact Design, Direct Drive Low Power Consumption, Self-Lubricating, Horizontal Mount, Steel Stator Housing, Stainless Steel Cartridge, Carbon Bearing, Chlorine Resistant EPDM O-Ring and Gasket
  • Exclusions: Mechanical Seal
  • Application: Hydro-Air Heating/Cooling, Heat Recovery Unit, Water Source Heat Pump, Hot or Chilled Water Cooling, Domestic Hot Water Recirculation System, Drain Down Open Loop Solar System, Fresh Water or Potable Water System, Indoor
  • Applicable Standard: UL (Canada and US), NSF/ANSI 61/372
  • Additional Information: Lead-Free
Cartridge Circulator Pump; Suction Size 3/4 Inch; Discharge Size 3/4 Inch; End Connection Female Threaded x Female Threaded; Overall Dimensions 5-5/8 Inch Length x 3-15/16 Inch Width; Flow Rate 0 to 11 GPM; Discharge Head 0 to 9.5 Foot; Casing Material Stainless Steel; Shaft Material Ceramic; Impeller Material Non-Metallic; Warranty 3 Year from Date of Manufacture; Power Rating 1/40 HP; Input Supply Rating 115 Volt AC 60 Hertz 1-Phase 0.52 Amp; Speed Rating 3250 RPM; Temperature Rating 40 to 220 Deg F; Pressure Rating 125 PSI; Motor Type Permanent Split Capacitor, Impedance Protected; Inclusions/Features Compact Design, Direct Drive Low Power Consumption, Self-Lubricating, Horizontal Mount, Steel Stator Housing, Stainless Steel Cartridge, Carbon Bearing, Chlorine Resistant EPDM O-Ring and Gasket; Exclusions Mechanical Seal; Application Hydro-Air Heating/Cooling, Heat Recovery Unit, Water Source Heat Pump, Hot or Chilled Water Cooling, Domestic Hot Water Recirculation System, Drain Down Open Loop Solar System, Fresh Water or Potable Water System, Indoor; Applicable Standard UL (Canada and US), NSF/ANSI 61/372; Lead-Free